HA-883

• This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
• High Slew Rate (HA-2510/883) . . . . . . . . . 50V/s (Min)
                                                                      65V/s (Typ)
• Wide Power Bandwidth (HA-2510/883). . . 750kHz (Min)
• Low Offset Current (HA-2510/883) . . . . . . . . 25nA (Min)
                                                                         10nA (Typ)
• High Input Impedance (HA-2510/883). . . . . 50M (Min)
                                                                     100M (Typ)
• Wide Small Signal Bandwidth. . . . . . . . . . 12MHz (Typ)
• Fast Settling Time (0.1% of 10V Step) . . . . 250ns (Typ)
• Low Quiescent Supply Current . . . . . . . . . . 6mA (Max)
• Internally Compensated For Unity Gain Stability

Thermal Resistance (Typical, Note 1) _{JA JC}
CERDIP Package . . . . . . . . . . . . . . . . . . . 115^oC/W 28^oC/W
Metal Can Package . . . . . . . . . . . . . . . . . 160^oC/W 75^oC/W
Package Power Dissipation Limit at 75^oC for T_J 175^oC
CERDIP Package . . . . . . . . . . . . . . . . . . . .. . . . . . . . 870mW
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . 625mW
Package Power Dissipation Derating Factor Above 75^oC
CERDIP Package . . . . . . . . . . . . . . . . . . . . . . . .  . .8.7mW/^oC
Metal Can Package . . . . . . . . . . . . . . . . . . . .. . . . .6.3mW/^oC
Maximum Junction Temperature . . . . . . . .  . . . . . . . . . 175^oC
Maximum Storage Temperature Range . . . . ..-65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . 300^oC

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. _JA is measured with the component mounted on an evaluation PC board in free air.

The HA-2510/883 and HA-2512/883 are a series of high performance operational amplifiers which set the standards for maximum slew rate and wide bandwidth operation in moderately powered, internally compensated, monolithic devices. In addition to excellent dynamic characteristics, these dielectrically isolated amplifiers also offer low offset current and high input impedance.

The ±50V/s minimum slew rate and fast settling time of the HA-2510/883 are ideally suited for high speed D/A, A/D,and pulse amplification designs. The HA-2510/883 and the HA-2512/883's superior bandwidth and 750kHz (HA-2510/883) minimum full power bandwidth are extremely useful in RF and video applications. To insure compliance with slew rate and transient response specifications, all devices are 100% tested for AC performance characteristics over full temperature limits. To improve signal conditioning accuracy, the HA-2510/883 and HA-2512/883  provide a maximum offset current of 25nA and a minimum input impedance of 50M, both at 25^oC, as well as offset voltage adjust capability.