HA-2520/883

Features:

• This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
• High Slew Rate (HA-2520/883) . . . . . . . . 100V/s (Min)
120V/s (Typ)
• Wide Power Bandwidth (HA-2520/883) . . 1.5MHz (Min)
• Wide Gain Bandwidth (HA-2520/883) . . . . 10MHz (Min)
20MHz (Typ)
• High Input Impedance (HA-2520/883). . . . . 50M (Min)
100M (Typ)
• Low Offset Current (HA-2520/883) . . . . . . . .25nA (Min)
10nA (Typ)
• Fast Settling (0.1% of 10V Step) . . . . . . . .. 200ns (Typ)
• Low Quiescent Supply Current . . . . . . . . . . 6mA (Max)

Application

• Data Acquisition Systems
• RF Amplifiers
• Video Amplifiers
• Signal Generators
• Pulse Amplification




Pinout

Specifications

Absolute Maximum Ratings Thermal Information
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . 40V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Voltage at Either Input Terminal . . . . . . . . . . . . .. . . . . . V+ to V-
Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50mA
Junction Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC
Storage Temperature Range . . . . . . . . . . . . . . -65^oC to +150^oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . +300^oC
Thermal Resistance _JAJC
CerDIP Package . . . . . . . . . . . . . . ..... .. . . 115^oC/W 28^oC/W
Ceramic LCC Package . . . . . . . . . ....... . . . 75^oC/W 23^oC/W
Metal Can Package . . . . . . . . . . . ..... . . . . 160^oC/W 75^oC/W
Package Power Dissipation Limit at +75^oC for T_J +175oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.33W
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 625mW
Package Power Dissipation Derating Factor Above +75^oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/^oC
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . 13.3mW/^oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3mW/^oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range. . . . . . . . . . . . . -55^oC to +125^oC
Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
V_INCM 1/2 (V+ - V-)
R_L 2k

Description

The HA-2520/883 is a monolithic operational amplifier which delivers an unsurpassed combination of specifications for slew rate, bandwidth and settling time. This dielectrically isolated amplifier is designed for closed loop gains of 3 or greater without external compensation. In addition, this high performance component also provides low offset current and high input impedance. The 100V/s (min) slew rate and fast settling time of this amplifier make it ideal for pulse amplification and data acquisition designs. To insure compliance with slew rate and transient response specifications, the device is 100% tested for AC performance characteristics over full temperature. This device is a valuable component for RF and video circuitry requiring wideband operation. For accurate signal conditioning designs, the HA-2520/883s superior dynamic specifications are complemented by 25nA (max) offset current and offset voltage adjust capability.