Features: Microcontrollers of the H8/38704 Group and the H8/38702S Group are CISC (complex instruction set computer) microcontrollers whose core is an H8/300H CPU, which has an internal 32-bit architecture. The H8/300H CPU provides upward compatibility with the H8/300 CPUs of other Renesas Technol...
H8/38704: Features: Microcontrollers of the H8/38704 Group and the H8/38702S Group are CISC (complex instruction set computer) microcontrollers whose core is an H8/300H CPU, which has an internal 32-bit archi...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Microcontrollers of the H8/38704 Group and the H8/38702S Group are CISC (complex instruction set computer) microcontrollers whose core is an H8/300H CPU, which has an internal 32-bit architecture. The H8/300H CPU provides upward compatibility with the H8/300 CPUs of other Renesas Technology-original microcontrollers.
As peripheral functions, each LSI of these Groups includes various timer functions that realize low-cost configurations for end systems. The power consumption of these modules can be kept down dynamically by power-down mode.
Item | Symbol | Value | Unit | Note | |
Power supply voltage | VCC | 0.3 to +4.3 | V | *1 | |
Analog power supply voltage | AVCC | 0.3 to +4.3 | V | ||
Input voltage | Other than port B | Vin | 0.3 to VCC +0.3 | V | |
Port B | AVin | 0.3 to AVCC +0.3 | V | ||
Port 9 pin voltage | VP9 | 0.3 to VCC +0.3 | V | ||
Operating temperature | Topr | Regular specifications: 20 to +75*2 |
|||
Wide-range temperature specifications: 40 to +85*3 |
|||||
Storage temperature | Tstg | 55 to +125 |
Notes: 1. Permanent damage may result if maximum ratings are exceeded. Normal operation should be under the conditions specified in Electrical Characteristics. Exceeding these values can result in incorrect operation and reduced reliability.
2. When the operating voltage is VCC = 2.7 to 3.6 V during flash memory reading, the operating temperature ranges from 20 to +75 when programming or erasing the flash memory. When the operating voltage is VCC = 2.2 to 3.6 V during flash memory reading, the operating temperature ranges from 20 to +50 when programming or erasing the flash memory.
3. The operating temperature ranges from 20 to +75 when programming or erasing the flash memory