H8062

Features: • Capability to process up to six pulse outputs or six pulse inputs• Six general registers (GRs, two per channel) with independently-assignable output compare or input capture functions• Selection of eight counter clock sources for each channel: Internal clocks: , /2, /...

product image

H8062 Picture
SeekIC No. : 004357933 Detail

H8062: Features: • Capability to process up to six pulse outputs or six pulse inputs• Six general registers (GRs, two per channel) with independently-assignable output compare or input capture ...

floor Price/Ceiling Price

Part Number:
H8062
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/21

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Capability to process up to six pulse outputs or six pulse inputs
• Six general registers (GRs, two per channel) with independently-assignable output compare or input capture functions
• Selection of eight counter clock sources for each channel: Internal clocks: , /2, /4, /8 External clocks: TCLKA, TCLKB, TCLKC, TCLKD
• Five operating modes selectable in all channels:
 --Waveform output by compare match Selection of 0 output, 1 output, or toggle output (only 0 or 1 output in channel 2)
 --Input capture function Rising edge, falling edge, or both edges (selectable)
 --Counter clearing function Counters can be cleared by compare match or input capture
 --Synchronization Two or more timer counters (16TCNTs) can be preset simultaneously, or cleared simultaneously by compare match or input capture.            Counter synchronization enables synchronous register input and output.
 --PWM mode PWM output can be provided with an arbitrary duty cycle. With synchronization, up to three-phase PWM output is possible
• Phase counting mode selectable in channel 2 Two-phase encoder output can be counted automatically.
• High-speed access via internal 16-bit bus The 16TCNTs and GRs can be accessed at high speed via a 16-bit bus.
• Any initial timer output value can be set
• Nine interrupt sources Each channel has two compare match/input capture interrupts and an overflow interrupt. All interrupts can be requested      independently.



Description

Bits 6 to 4-Standby Timer Select 2 to 0 (STS2 to STS0): These H8062 bits select the length of time the CPU and on-chip supporting modules wait for the internal clock oscillator to settle when software standby mode is exited by an external interrupt.

When using a crystal oscillator, set these bits so that the waiting time will be at least 7 ms at the system clock rate. When operating on an external clock, care is required in the case of the H8/3064F-ZTAT B-mask version, H8/3062F-ZTAT B-mask version, H8/3064 mask ROM Bmask version, H8062 mask ROM B-mask version, H8/3061 mask ROM B-mask version, and H8/3060 mask ROM B-mask version.

For further information about H8062 waiting time selection, see section 21.4.3, Selection of Waiting Time for Exit from Software Standby Mode.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
RF and RFID
Optical Inspection Equipment
Connectors, Interconnects
Cables, Wires
Motors, Solenoids, Driver Boards/Modules
Optoelectronics
View more