GS4915

Features:

• Reduces jitter for clocks of 148.5MHz, 148.5/1.001MHz, 74.25MHz, 74.25/1.001MHz and 27MHz
• Output jitter as low as 20ps peak to peak
• Automatic bypass mode for all other clock rates
• Loop bandwidth adjustable as low as 2kHz
• Output skew control
• Input selectable as differential or single-ended
• Both single-ended and differential outputs
• Uses the GO1555 VCO
• Small 6mm x 6mm 40-pin QFN package
• Pb-free and RoHS compliant




Application

High definition video systems. Digital video recording,playback, processing and display devices.




Pinout






Specifications

Parameter	Value
Supply Voltage (SE_VDD, REG_VDD)	-0.3 to +4.0 VDC
Core Supply Voltage (all 1.8V supplies)	-0.3 to +2.2 VDC
Input ESD Voltage	1 kV HBM
Storage Temperature	-50 < TS < 125
Operating Temperature	-20 < TA < 85
NOTE: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions or at any other condition beyond those indicated in the AC/DC Electrical Characteristic sections is not implied.

Description


The GS4915 provides a low jitter clock output when fed with an HD or SD video clock input. Other input clock frequencies between 12MHz and 165MHz can be automatically passed through to the GS4915 outputs.

An internal 2:1 mux of GS4915 allows the user to select between a differential or single-ended (LVCMOS) input clock. Both a single-ended LVCMOS- compatible and an LVDS-compatible differential output are provided.

The GS4915 may operate in either auto or fixed frequency mode. In auto mode, the device will automatically clean the selected input clock if GS4915's frequency is found to be one of the supported SD or HD clock rates. In fixed mode, the user selects only one of these frequencies to be cleaned.

In addition, the GS4915 allows the user to select between auto or manual bypass operation. In autobypass mode, the GS4915 will automatically bypass its cleaning stage and pass the input clock signal directly to the output whenever the device is unlocked which includes the case where the input frequency is something other than the five frequencies supported. In manual bypass mode, the input signal passes through directly to the output.

The GS4915 can optionally double the output frequency for 74.25MHz or 74.175MHz HD clocks in order to provide optimal jitter performance of some serializers.

The GS4915 also provides the user with a 2-state skew control. The output clocks produced by the device may be advanced by 1/4 of an output PCLK period in order to accommodate downstream setup and hold requirements.

The GS4915 is designed to operate with the GO1555 VCO.

The GS4915 Clock Cleaner complements Gennum's GS4911B Clock and Timing Generator for implementing a video genlock solution. Whereas the GS4911B itself cleans low-frequency jitter, the GS4915 is designed to clean primarily the higher frequency jitter of clocks generated by the GS4911B.