DescriptionThe GS2970 is a multi-rate SDI receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to support signals with other coding schemes.
The GS2970 features an integrated reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.6UI.
A serial digital loop through output is provided, which can be configured to output either reclocked or non-reclocked serial digital data. The serial digital output can be connected to an external cable driver. The GS2970 operates in one of four basic modes: SMPTE mode, DVB-ASI mode, Data-Through mode or Standby mode.
In SMPTE mode, the GS2970 performs full SMPTE processing, and features a number of data integrity checks and measurement capabilities.
The GS2970 also supports ancillary data extraction, and can provide entire ancillary data packets through host-accessible registers. GS2970 also provides a variety of other packet detection and error handling features. All of these processing features are optional, and may be individually enabled or disabled through register programming.
Both SMPTE 425M Level A and Level B inputs of GS2970 are supported with optional conversion from Level B to Level A for 1080p 50/60 4:2:2 10-bit.
In DVB-ASI mode, 8b/10b decoding is applied to the received data stream.
In Data-Through mode all forms of SMPTE and DVB-ASI decoding are disabled, and the GS2970 can be used as a simple serial to parallel converter.
The GS2970 can also operate in a lower power Standby mode. In this mode, no signal processing is carried out and the parallel output is held static.
Parallel data outputs of GS2970 are provided in 20-bit or 10-bit format for 3Gb/s, HD and SD video rates, with a variety of mapping options. As such, this parallel bus can interface directly with video processor IC's, and can be multiplexed onto 10 bits for a low pin count interface.
Up to eight channels (two audio groups) of serial digital audio GS2970 may be extracted from the video data stream, in accordance with SMPTE 272M-C and SMPTE 299M.
The output signal formats supported by the GS2970 include AES/EBU and I2S, and two other industry standard serial digital formats. A variety of audio processing features are provided to ease implementation. Necessary audio clocks are directly generated and provided by the GS2970.
GS2970 Data Sheet
