GS-C200

Features:

Absolute and incremental positioning
Up to 999,999 step permove
Speed range to 10,000 steps/s
Ramp lenght to 999 steps
Single unregulated supply voltage
Index and velocity mode
Automatic and Home positioning
Loops and Delay execution
Conditional start and stop
Status feedback to the host
RS232 communication port
Point to point and Multipoint protocol
Closed loop operation
Counter preset (GS-C200S only)
Jump to (GS-C200S only)
Jump to on-condition (GS-C200Sonly)
Initialization during execution (GS-C200Sonly)
Auxiliary output voltages +5V, ± 12V

Specifications

Symbol	Parameter	Value	Unit
Vs	DC SupplyVoltage	42	V
Tstg	Storage Temperature Range	40to+85	°C
Top	Operating Temperature Range	0to+50	°C
	Humidity (non condensing)	0to90	%

Description

The GS-C200 and GS-C200Sare powerful stepper motor control modules that interface every power sequencer/driver available on themarket.

A sophisticated hardware and an easy to learn programming language result in minimal development and debugging time of motion control systems. The GS-C200 is supported by dedicated software that includes both an on-screen editorand a debugger that greatly improve the module ease of use.

The instruction sets comprise respectively 25 (GS-C200) and 29 (GS-C200S) different commandswhich can be executed either under host control or in a stand alone environment. An on board EE-PROM is used for program saving and retrieving.

The availability of three User inputs and three programmable User outputs, each of which can be tested or set under program control, assures to the designer ahigh level of systempower and flexibility.