DescriptionThe GL9714 is a 4-lane PCI Express PHY Layer Controller, which is compliant with PCI Express BaseSpecification rev. 1.0a and Intel's PHY Interface for the PCI Express Architecture rev. 1.0. It integrates a quad SerDes and the Physical Coding Sublayer (PCS) which performs 8b/10b encoding...
GL9714: DescriptionThe GL9714 is a 4-lane PCI Express PHY Layer Controller, which is compliant with PCI Express BaseSpecification rev. 1.0a and Intel's PHY Interface for the PCI Express Architecture rev. 1....
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The GL9714 is a 4-lane PCI Express PHY Layer Controller, which is compliant with PCI Express Base
Specification rev. 1.0a and Intel's PHY Interface for the PCI Express Architecture rev. 1.0. It integrates a quad SerDes and the Physical Coding Sublayer (PCS) which performs 8b/10b encoding and decoding, elastic buffer and receiver detection, data serialization and deserialization for each lane. The quad SerDes in the GL9714 supports an effective serial interface speed (2.5 Gb/s) of data bandwidth for each lane, intended for use in ultrahigh-speed bi-directional data transmission system. The GL9714 can also be externally configured for various combinations of lane number and parallel bus width which is flexible and suitable for x1, x2 or x4 lane implementation. It also supports four operational states for power management to minimize power consumption. For production and self-test purposes, the GL9714 provides BIST and an internal loopback capability.
The primary application of GL9714 is to provide very high-speed I/O data channels for point-to-point baseband data transmission over an on-chip termination resister of 50 Ohm +/- 10%.
GL9714 can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector pins, and transmit/receive pins. Parallel data loaded into the transmitter is delivered to the receiver over a serial channel. GL9714 is then reconstructed into its original parallel format. The maximum data transfer rate in each direction is 1 Giga byte per second with the 4-lane configuration. GL9714 also offers various power saving modes to significantly reduce power consumption as well as scalability for a higher data rate in the future.