Features: • Low-cost solution for low-speed USB keyboard• 8-bit micro-controller− Operation Speed: 6MHz clock input− Performance: 3 MIPS @ 6MHz− Single cycle instruction execution− RISC-like architecture− USB optimized instruction set• USB Specificat...
GL602USB: Features: • Low-cost solution for low-speed USB keyboard• 8-bit micro-controller− Operation Speed: 6MHz clock input− Performance: 3 MIPS @ 6MHz− Single cycle instructio...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Low-cost solution for low-speed USB mouse 8-bit micro-controller - Operation Speed: DC ...
Maximum ratings are the extreme limits to which the GL652USB can be exposed without permanently damaging it. The GL652USB contains circuitry to protect the inputs against damage from high static voltages; however, do not apply voltages higher than those shown in the table. Keep VIN and VOUT within the range GND (VIN or V OUT) VCC. Connect unused inputs to the appropriate voltage level, either GND or VDD.
Symbol |
Characteristic |
Value |
Unit |
TSTG |
Storage temperature |
-55 to +150 |
°C |
TOP |
Operating temperature |
0 to +70 |
°C |
VCC |
Supply voltage |
-0.5 to +7.0 |
V |
VIN |
DC input voltage |
-0.5 to +VDD + 0.5 |
V |
I |
Maximum current per pin excluding VDD and VSS |
25 |
mA |
IMGND |
Maximum current out of GND |
100 |
mA |
IMVCC |
Maximum current out of VCC |
100 |
mA |
VESD |
Static discharge voltage |
>4000 |
V |
The GL602USB is an 8-bit RISC-like high performance microcontroller with a built-in 1.5Mbps SIE and transceiver. The microcontroller features 33 instructions optimized for USB keyboard. There are 96 bytes onchip RAM and 4K x 14 bits program ROM incorporated into the micro-controller. The micro-controller GL602USB features 18 output pins and 8 input pins to make a 18 x 8 key matrix. Additionally, 3 GPIO pins are strong enough to drive LEDs. 4 GPIO pins can be used by any function, for example, support a PS/2 3D mouse to USB 3D mouse onverter in the default firmware. Legacy USB cable of GL602USB can be used for keyboard in USB mode. All GPIO ports feature low EMI emissions as a result of improved output drivers with slew-rate control.