Features: Low, 90A No-Load Supply Current Guaranteed 300mA Output Current Dropout Voltage is 200mV @ 150mA Load PSRR=65dB @ 120Hz; 55dB @ 1kHz Over-Temperature Protection and Short-Circuit Protection Fixed Mode: 1.20V~5.00V (G916-XXX) Adjustable Mode: from 1.25V to 5.50V (G916) Max. Supply Current...
G916: Features: Low, 90A No-Load Supply Current Guaranteed 300mA Output Current Dropout Voltage is 200mV @ 150mA Load PSRR=65dB @ 120Hz; 55dB @ 1kHz Over-Temperature Protection and Short-Circuit Protectio...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The G916 series is a low supply current, high PSRR, low noise, and low dropout linear regulator that comes in a space saving TSOT-23-5, SOT-23-5 package.
The supply current at no-load is 90A. In the shutdown mode, the maximum supply current is less than 1A.
Operating voltage range is from 2.5V to 6.0V. The over-current protection limit of G916 is set at 550mA typical. An over- temperature protection circuit is built-in in the Device to prevent thermal overload. These power saving features make the G916 series ideal for use in the battery-powered applications such as notebook computers, cellular phones, and PDA's.
The G916 has two modes of operation. When the SET pin is connected to ground, its output is a pre-set value: 3.3V.
There is no external component needed. When an output other than the preset value is needed, two external resistors should be used as a voltage divider. The output voltage of G916 is then adjusted by the resistor ratio.
G916-XXX is with fixed-mode output. The output voltage range is from 1.2V to 5.0V.