Features: ·Low, 55µA No-Load Supply Current ·Guaranteed 150mA Output Current ·Dropout Voltage is 70mV @ 50mA Load ·Over-Temperature Protection and Short-Circuit Protection ·Two Modes of Operation ---- Fixed Mode: 2.84V (G913A), 3.15V (G913B), 3.30V (G913C), 3.00V (G913D) Adjustable Mode: f...
G913: Features: ·Low, 55µA No-Load Supply Current ·Guaranteed 150mA Output Current ·Dropout Voltage is 70mV @ 50mA Load ·Over-Temperature Protection and Short-Circuit Protection ·Two Modes of Opera...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The G913 is a low supply current, low dropout linear regulator that comes in a space saving SOT23-5 package.The supply current at no-load is 55µA. In the shutdown mode, the maximum supply current is less than 1µA. perating voltage range of the G913 is from 2.5V to 5.5V. The over-current protection limit is set at 250mA typical and 150mA minimum. An overtemperature protection circuit is built-in in the G913 to prevent thermal overload. These power saving features make the G913 ideal for use in the battery- powered applications such as notebook computers, cellular phones, and PDA's.
The G913 has two modes of operation. When the SET pin is connected to ground, its output is a pre-set value: 2.84V for G913A, 3.15V for G913B, and 3.30V for G913C, and 3.00V for G913D. There is no external components needed to decide the output voltage. When an output other than the preset value is needed, two external resistors should be used as a voltage divider. The output voltage is then decided by the resistor ratio. The G913 comes in a space saving SOT23-5 package.