FSUSB30

Low On Capacitance, 6.5pF (typical)
Low On Resistance, 6.5 (typical)
Low power consumption (1A maximum)
10A maximum ICCT over and expanded control voltage range (V_IN = 2.6V, V_CC = 4.3V)
Wide -3dB bandwidth, >720MHz
8KV ESD protection
Power OFF protection when V_CC = 0V, D+/D- pins can tolerate up to 4.3V
Packaged in:
Pb-Free 10-lead MicroPak™ (1.6mm x 2.1mm)
Pb-Free 14-lead DQFN
Pb-Free 10-lead MSOP (preliminary)

The FSUSB30 is a Low Power, 2-Port Hi-Speed USB 2.0 switch. This part is configured as a DPDT switch and is optimized for switching between two Hi-Speed (480Mbps) sources or a Hi-Speed and Full Speed (12Mbps) source. The FSUSB30 is compatible with the requirements of USB2.0 and features an extremely low On Capacitance (C_ON) of 6.5pF. The wide bandwidth of this device (720MHz), exceeds the bandwidth needed to pass the 3^rd harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference.

The FSUSB30 contains special circuitry on the D+/Dpins which allows the device to withstand an overvoltage condition. This device is also designed to minimize current consumption even when the control voltage applied to the S pin, is lower than the supply voltage (V_CC). This feature of FSUSB30 is especially valuable to Ultra-Portable applications such as cell phones, allowing for direct interface with the General Purpose I/Os of the baseband processor. Other applications of FSUSB30 include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers.