FPF2143

Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Packaging : Reel
Supply Voltage - Max : 5.5 V
On Resistance (Max) : 0.12 Ohms
Supply Voltage - Min : 1.8 V
Package / Case : MLP EP-6


Specifications

      

Product	Product status	Eco Status	Pricing*	Package type	Leads	Packing method	Package Drawing	Package Marking Convention**
FPF2143	Full Production	Green	$0.72	MicroFET	6	TAPE REEL		Line 1: &E&Y (Binary Calendar Year Coding) Line 2: &O143&C Line 3: &.&O&V

* Fairchild 1,000 piece Budgetary Pricing

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Package marking information for product FPF2143 is available. Click here for more information .

Description

The FPF2140/42/43/44/46/47 is a series of load switches whichprovides full protection to systems and loads which mayencounter large current conditions. FPF2140/42/43/44/46/47 contain a0.11Ω current-limited P-channel MOSFET which can operateover an input voltage range of 1.8-5.5V. Internally, current isprevented from flowing when the MOSFET is off and the outputvoltage is higher than the input voltage. Switch control is by alogic input (ON) capable of interfacing directly with low voltagecontrol signals. Each part of FPF2140/42/43/44/46/47 contains thermal shutdown protectionwhich shuts off the switch to prevent damage to the part when acontinuous over-current condition causes excessive heating.

When the switch current reaches the current limit, the partoperates in a constant-current mode to prohibit excessivecurrents from causing damage. For the FPF2140/42/44/46, ifthe constant current condition still persists after 30ms, the partwill shut off the switch and pull the fault signal pin (FLAGB) low.The FPF2140/44 have an auto-restart feature which will turn theswitch on again after 450ms if the ON pin is still active. TheFPF2142/46 do not have this auto-restart feature so the switchwill remain off until the ON pin is cycled. For the FPF2143/47, acurrent limit condition will immediately pull the fault signal pinlow and the part will remain in the constant-current mode untilthe switch current falls below the current limit. The minimumcurrent limit is 200mA for the FPF2140/42/43 while that for theFPF2144/46/47 is 400mA.

FPF2140/42/43/44/46/47 are available in a space-saving 6 pin 2X2 MLPpackage.

Parameters:

Technical/Catalog Information	FPF2143
Vendor	Fairchild Semiconductor
Category	Integrated Circuits (ICs)
Type	High Side Switch
Number of Outputs	1
Voltage - Input	1.8 ~ 5.5 V
Package / Case	6-MLP
Packaging	Tape & Reel (TR)
Current Limit	200mA
Internal Switch(s)	Yes
Operating Temperature	-40°C ~ 85°C
Rds (On)	160 mOhm
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	FPF2143 FPF2143 FPF2143TR ND FPF2143TRND FPF2143TR