FMS6502MTC24X

The FMS6502MTC24X belongs to FMS6502 family which provides eight inputs that can be routed to any of six outputs. Each input supports an integrated clamp option to set the output sync tip level of video with sync to ~300mV. Alternatively, the input may be internally biased to center output signals without sync (Chroma, Pb, Pr) at ~1.25V. Each input of FMS6502MTC24X can be routed to one or more outputs, but only one input may be routed to any output. All outputs are designed to drive a 150 DC-coupled load. Input-to-output routing and input bias mode functions are controlled via an I2C-compatible digital interface. Each output can be programmed to provide either 0dB or 6dB of signal gain.

The features of FMS6502MTC24X can be summarized as (1)8 x 6 crosspoint switch matrix; (2)supports SD, PS, and HD 1080i / 1080p video; (3)input clamp and bias circuitry; (4)doubly terminated 75 cable drivers; (5)programmable 0dB or 6dB Gain; (6)AC- or DC-Coupled Inputs; (7)AC- or DC-Coupled Outputs; (8)one-to-one or one-to-many input-to-output switching; (9)I2CTM-compatible digital interface, standard mode; (10)3.3V or 5V single supply operation; (11)Pb-Free TSSOP-24 Package.

The absolute maximum ratings of FMS6502MTC24X are (1)DC supply voltage: -0.3 6 V; (2)analog and digital I/O: -0.3 Vcc + 0.3 V; (3)output current any one channel, do not exceed: 40 mA.(Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.)