Features: 12 x 9 Crosspoint Matrix Supports SD, PS, and HD 1080i/1080p Video Input Clamp / Bias Circuitry AC or DC-Coupled Inputs AC or DC-Coupled Outputs Dual Load(75) Output Drivers with High Impedance Disable One-to-One or One-to-Many Input to Output Switching Programmable Gain: +6, +7, +8 or ...
FMS6501: Features: 12 x 9 Crosspoint Matrix Supports SD, PS, and HD 1080i/1080p Video Input Clamp / Bias Circuitry AC or DC-Coupled Inputs AC or DC-Coupled Outputs Dual Load(75) Output Drivers with High Imp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Min. | Max. | Unit |
DC Supply Voltage | -0.3 | 6 | V |
Analog and Digital I/O | -0.3 | VCC + 0.3 | V |
Output Current Any One Channel, Do Not Exceed | 60 | mA |
The FMS6501 provides 12 inputs which can be routed to any of 9 outputs. Each input can be routed to one or more outputs but only one input may be routed to any output. The input to output routing is controlled via an I2C compatible digital interface.
Each input of FMS6501 supports an integrated clamp option to set the output sync tip level of video with sync to ~300mV. Alternatively, the input may be internally biased to center signals without sync (Chroma, Pb, Pr) at ~1.25V. These DC output levels are for the 6dB gain setting. Higher gain settings will increase the DC output levels accordingly. The input clamp / bias mode is selected via I2C.