Features: 7.6MHz 5th order Y,C filters with composite summer14dB notch at 4.425MHz to 4.6MHz for sound trap capable of handling stereo50dB stopband attenuation at 27MHz on Y, C and CV outputsBetter than 0.5dB flatness to 4.2MHz on Y, C and CV outputsEqualizer and notch filter for driving RF modula...
FMS6406: Features: 7.6MHz 5th order Y,C filters with composite summer14dB notch at 4.425MHz to 4.6MHz for sound trap capable of handling stereo50dB stopband attenuation at 27MHz on Y, C and CV outputsBetter ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Product | Product status | Eco Status | Pricing* | Package type | Leads | Packing method | Package Drawing | Package Marking Convention** |
---|---|---|---|---|---|---|---|---|
FMS6406CS | Not recommended for new designs | RoHS Compliant | N/A | SOIC | 8 | RAIL | Line 1: $Y (Fairchild logo) &Z (Asm. Plant Code) &2 (2-Digit Date Code) &K Line 2: 6406 Line 3: CS | |
FMS6406CSX | Full Production | RoHS Compliant | $1.69 | SOIC | 8 | TAPE REEL | Line 1: $Y (Fairchild logo) &Z (Asm. Plant Code) &2 (2-Digit Date Code) &K Line 2: 6406 Line 3: CS |
* Fairchild 1,000 piece Budgetary Pricing |
** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples |
Package marking information for product FMS6406 is available. Click here for more information . |
The FMS6406 is a dual Y/C 5th order Butterworth lowpass video filter optimized for minimum overshoot and flat group delay. The FMS6406 also contains a summing circuit to generate filtered composite video, an audio trap and group delay compensation circuit. The audio trap removes video information in the spectral location of the subsequent RF audio carrier. The group delay circuit predistorts the signal to compensate for the inherent receiver IF filter's group delay distortion.
In FMS6406 application, the Y and C input signals from DACs are AC coupled into the filters. Both channels have DC restore circuitry to clamp the DC input levels during video sync. The Y and C channels use separate feedback clamps. The clamp pulse is derived from the Y channel.
All outputs of FMS6406 are capable of driving 2Vpp, AC or DC coupled, into either a single or dual video load. A single video load consists of a series 75 impedance matching resistor connected to a terminated 75 line, this presents a total of 150 of loading to the part. A dual load would be two of these in parallel which would present a total of 75 to the part. The gain of the Y, C and CV signals is 6dB with 1Vpp input levels. All video channels are clamped during sync to establish the appropriate output voltage reference levels.