Features: * 10-bit resolution* 150 megapixels per second* ± 0.1% linearity error* Sync and blank controls* 1.0V p-p video into 37.5or 75load* Internal bandgap voltage reference* Double-buffered data for low distortion* TTL-compatible inputs* Low glitch energy* Single +5 Volt power supplyApplicatio...
FMS3115: Features: * 10-bit resolution* 150 megapixels per second* ± 0.1% linearity error* Sync and blank controls* 1.0V p-p video into 37.5or 75load* Internal bandgap voltage reference* Double-buffered data...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Min | Typ | Max | Unit |
Power Supply Voltage | ||||
VDD (Measured to GND) | -0.5 | 7.0 | V | |
Inputs | ||||
Applied Voltage (measured to GND)2 |
-0.5 | VDD + 0.5 | V | |
Forced Current3,4 |
-10.0 | 10.0 | mA | |
Outputs | ||||
Applied Voltage (measured to GND)2 |
-0.5 | VDD + 0.5 | V | |
Forced Current3,4 |
-60.0 | 60.0 | mA | |
Short Circuit Duration (single output in HIGH state to ground) | Infinite | second | ||
Temperature | ||||
Operating, Ambient | -20 | 110 | ||
Junction | 150 | |||
Lead Soldering (10 seconds) | 300 | |||
Vapor Phase Soldering (1 minute) | 220 | |||
Storage | -65 | 150 |
FMS3110 | 100 Ms/s |
FMS3115 | 150 Ms/s |
TTL-level inputs of FMS3110/3115 are converted to analog current outputs that can drive 2537.5 loads corresponding to doubly-terminated 5075 loads. A sync current following SYNC input timing is added to the IOG output. BLANK will override RGB inputs, setting IOG, IOB and IOR currents to zero when BLANK= L. Although appropriate for many applications the internal 1.235V reference voltage can be overridden by the VREF input.
Few external components of FMS3110/3115 are required, just the current reference resistor, current output load resistors, and decoupling capacitors.
Package of FMS3110/3115 is a 48-lead LQFP. Fabrication technology is CMOS. Performance is guaranteed from 0 to 70°C.