Specifications Parameter Symbol Test Conditions Min Max Units Supply Voltage VDD For any operating current 8 V Supply Current IDD For VDD < 7V 75% IDSS mA RF Input Power PIN For standard bias conditions -8 dBm Storage Temperature TSTG Non-Operating Stor...
FMA411: Specifications Parameter Symbol Test Conditions Min Max Units Supply Voltage VDD For any operating current 8 V Supply Current IDD For VDD < 7V 75% IDSS mA RF Input ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Symbol | Test Conditions | Min | Max | Units |
Supply Voltage | VDD | For any operating current | 8 | V | |
Supply Current | IDD | For VDD < 7V | 75% IDSS | mA | |
RF Input Power | PIN | For standard bias conditions | -8 | dBm | |
Storage Temperature | TSTG | Non-Operating Storage | -40 | 150 | ºC |
Total Power Dissipation | PTOT | See De-Rating Note below | 1400 | mW | |
Gain Compression | COMP | Under any bias conditions | 5 | dB | |
Simultaneous Combination of Limits2 | 2 or more Max. Limits | 80 | % |
The FMA411 is a 2-stage, reactively matched pHEMT low-noise MMIC amplifier designed for use over the 8.5 to 14.0 GHz bandwidth. The amplifier FMA411 requires a single +6V supply and one off-chip component for supply de-coupling; the supply voltage can be varied from +3V to +6V if needed. Both the input and output ports are DC de-coupled. Grounding of the amplifier is provided by plated thru-vias to the bottom of the die, no additional ground is required. Operating current of FMA411 can be adjusted using the Source resistor ladders located along the bottom edge, by bonding a particular pad to ground, in order to optimize noise or power performance.