Features: * Common features: Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility VOH = 3.3V (typ.) VOL = 0.3V (typ.) Meets or exceeds JEDEC standard 18 specifications Product available in Radiation Tolerant and RadiationEnhanced versions Military produc...
FCT534T: Features: * Common features: Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility VOH = 3.3V (typ.) VOL = 0.3V (typ.) Meets or exceeds JEDEC standard 18 s...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
* Common features:
Low input and output leakage 1A (max.)
CMOS power levels
True TTL input and output compatibility
VOH = 3.3V (typ.)
VOL = 0.3V (typ.)
Meets or exceeds JEDEC standard 18 specifications
Product available in Radiation Tolerant and Radiation
Enhanced versions
Military product compliant to MIL-STD-883, Class B
and DESC listed (dual marked)
Available in DIP, SOIC, SSOP, QSOP, CERPACK
and LCC packages
* Features for FCT374T/FCT534T/FCT574T:
Std., A, C and D speed grades
High drive outputs (-15mA IOH, 48mA IOL)
* Features for FCT2374T/FCT2574T:
Std., A, and C speed grades
Resistor outputs (-15mA IOH, 12mA IOL Com.)
(-12mA IOH, 12mA IOL Mil.)
Reduced system switching noise
Symbol | Rating | Commercial | Military | Unit |
VTERM(2) |
Terminal Voltage with Respect to GND |
0.5 to +7.0 | 0.5 to +7.0 | V |
VTERM(3) |
Terminal Voltage with Respect to GND |
0.5 to VCC +0.5 |
0.5 to VCC +0.5 |
V |
TA | Operating Temperature |
0 to +70 | 55 to +125 | °C |
TBIAS | Temperature Under Bias |
55 to +125 | 65 to +135 | °C |
TSTG | Storage Temperature |
55 to +125 | 65 to +150 | °C |
PT | Power Dissipation | 0.5 | 0.5 | W |
IOUT | DC Output Current |
60 to +120 | 60 to +120 | mA |
The FCT374T/FCT2374T, FCT534T and FCT574T/ FCT2574T are 8-bit registers built using an advanced dual metal CMOS technology. These registers consist of eight D- type flip-flops with a buffered common clock and buff ered 3-state output control. When the output enable () input is LOW, the eight outputs are enabled. When the input is HIGH, the outputs are in the high-impedance state.
Input data meeting the set-up and hold time requirements of the FCT374T/FCT2374T, FCT534T and FCT574T/ FCT2574T D inputs is transferred to the Q outputs on the LOW-to-HIGH transition of the clock input.
The FCT374T/FCT2374T, FCT534T and FCT574T/ FCT2574T have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot and controlled output fall times-reducing he need for external series terminating resistors. FCT2xxxT arts are plug-in replacements for FCTxxxT parts.