Features: • Wide range of supply voltage: VCC=2.5 to 20V• MOSFET direct driving• Selectable output stage for Pch/Nch MOSFET on each channel• Low operating current by CMOS process: 2.5mA (typ.)• 2ch PWM control IC• High frequency operation: 300kHz to 1.5MHz•...
FA3687V: Features: • Wide range of supply voltage: VCC=2.5 to 20V• MOSFET direct driving• Selectable output stage for Pch/Nch MOSFET on each channel• Low operating current by CMOS pro...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Item | Symbol | Rating | Unit |
Power supply voltage | VCC | 20 | V |
SEL1, SEL2 pin voltage | VSEL | 0.3 to 5.0 | V |
FB1, IN1, FB2, IN2, IN2+ pin voltage | V EA_IN | 0.3 to 5.0 | V |
CS1, CS2, CP, RT, VREG pin voltage | V CTR_IN | 0.3 to 5.0 | V |
OUT1/2 OUT pin source current OUT pin sink current |
I OUT I OUT+ |
400 (peak) 150 (peak) |
mA mA |
OUT1/2 OUT pin source current |
I OUT I OUT+ |
50 (continuous) 50 (continuous) |
mA mA |
Power dissipation * | Pd | 300 (Ta25°C) | mW |
Operating junction temperature | TJ | +125 | °C |
Operating ambient temperature | TOPR | 30 to +85 | °C |
Storage temperature | TSTG | 40 to +125 | °C |
FA3687V is a PWM type DC-to-DC converter control IC with 2ch outputs that can directly drive power MOSFETs. CMOS devices with high breakdown voltage are used in this IC and low power consumption is achieved. This IC is suitable for very small DC-to-DC converters because of their small and thin package (1.1mm max.), and high frequency operation (up to 1.5MHz). You can select Pch or Nch of MOSFETs driven, and design any topology of DC-to-DC converter circuit like a buck, a boost, inverting, a fly-back, or a forward.