Features: • Single chip for driving high/low side MOSFETs /IGBTs• High to low side isolation of 600V• Common-mode dv/dt immunity of greater than 50V/nanosecond• Undervoltage lockout• Optimized power circuit layout• High side bootstrap supply• Sockets for f...
EV6R11: Features: • Single chip for driving high/low side MOSFETs /IGBTs• High to low side isolation of 600V• Common-mode dv/dt immunity of greater than 50V/nanosecond• Undervoltage ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The EV6R11 KIT implements a single power phase-leg circuit on a double-sided PCB, using the ISOSMARTTM HALF BRIDGE DRIVER CHIPSET - IX6R11and IXDP630 dead time generator. This evaluation board includes an assembled and tested PCB with two power devices. Just follow the instructions in this document and connect the board to the load and power.
Any power circuit is layout sensitive. The layout of this PCB is a proven, working layout. The designer is invited to duplicate this layout in his system, following the evaluation of the driver chipset.
Most systems vary in their power level requirements and therefore the power devices used. Due to this fact and fluctuations in availability of power devices, the kit will not always include the same power devices. The designer is encouraged to use the power devices that are required for his system. The devices that are enclosed serve only for initial evaluation.