Features: • For CMX602B Product Evaluation• Adjunct Box or Feature Phone Configuration• Single Power Supply Operation• LCD Display or RS232 Link to PC with Software• On-Board Regulator• Socketed Components for Adjustment• User's Prototyping Area• Soc...
EV6021: Features: • For CMX602B Product Evaluation• Adjunct Box or Feature Phone Configuration• Single Power Supply Operation• LCD Display or RS232 Link to PC with Software• On...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Min. | Max. | Units | |
Supply (VIN - VSS) | -0.3 | 40.0 | V |
Supply (VDD - VSS) | -0.3 | 7.0 | V |
Voltage on any connector pin to VSS | -0.3 | VDD + 0.3 | V |
Current into or out of VIN and VSS pins | 0 | +1.5 | A |
Current into or out of any other pin | -20 | +20 | mA |
Storage Temperature | - | +70 | |
Operating Temperature | +10 | +35 |
The EV6021 Evaluation Kit comprises a single board containing a CMX602B, line interface components, PIC Controller and the option of using either the on-board 4-line LCD module or interfacing to a PC via a serial communications port. For the latter mode of operation Windows software is supplied. When using the LCD module three switches are used to select the EV6021 mode of operation.
The EV6021 board is powered from a single 8 - 14V dc power supply; an on-board regulator sets VDD. LEDs indicate control, interrupt and detect line status (ZP, MODE, IRQN and DET) and the CMX602B may be driven from an external clock, or from its own crystal oscillator. Important signals can be monitored by test points. The CMX602B is socketed for easy replacement; there is room for the user to fit a ZIF socket. A user prototyping area is provided.
On-board circuitry EV6021 may be used to implement a wetting pulse and to place an ac or dc load on the line. A hook relay connects the 2- to 4-wire interface/op-amp hybrid for voice communications to the line. An external phone socket for adjunct box demonstration is provided, the connection to which can be disabled with a relay. A mutable local voice input and DTMF generator (for CIDCW acknowledgement tone) are provided. Operation is indicated by LEDs. The CMX602B supply current may be measured by removing a jumper. Where components are telco-specific (line impedance, line protection, ac-load, wetting pulse, etc.) space is provided for the user to add appropriate components.