ES2839

 * V.90/V.92 analog data/fax/TAM modem
 * Data mode capabilities:- V.90/V.92: 56 kbps- ITU-T V.34: 33.6 kbps and fallbacks
 * Fax mode capabilities:- ITU-T V.17, V.29, V.27ter, and V.21ch2- Group 3 (TIA/EIA-578 Class 1 and Class 2)
 * Requires minimum 166-MHz Pentium with MMX technology
 * PC99/PC2001-compliant with support for V.250, V.251, and V.253 commands
 * V.80 (H.324 software-stack-compatible)
 * Buzzer generator feature generates oscillation on handshaking
 * Caller ID
 * Data/fax/voice call discrimination
 * Worldwide homologation
 * Compliant with ACPI 1.0 and PCI Power Management Interface 1.0, supporting the D3  wake-on-ringcold
 * 16-bit ADC and DAC with built-in anti-aliasing and  reconstruction filters
 * Separate analog (5V) and digital (3.3V with 5V tolerance for digital circuits) power supplies
 * Internal PLL, requiring a lower frequency crystal for 18.816-MHz input
 * EEPROM interface for subsystem vendor ID
 * Supports Microsoft Windows Unimodem V and TAPI specifications
 * Supports Microsoft Windows 98/SE/ME/2000
 * Supports Microsoft Windows NT 4.0

The ES2839/ES2840 is a high-performance, two-chip, host-based modem solution that delivers high connectivity and throughput, using a solid-state DAA instead of a traditional transformer DAA. The chipset consists of the ES2839 TeleDrive, modem chip  and the  ES2840, its  accompanying high-voltage, solid-state DAA device. Together, the ES2839 and ES2840 devices comprise a very low-cost  modem solution for  add-in cards, desktops, and notebooks.

The ES2839 modem is capable of send/receive data and fax, supports telephone answering machine (TAM), and is capable of data/fax/voice call discrimination. With its built-in ACPI andD3  wake-on-ring support, the ES2839, plus the ES2840, cold forms an ideal modem solution for notebooks and battery-operated devices.

The ES2839 includes a PCI bus interface, codec, and low-voltage, solid-state DAA. It also includes ADC and DAC conversions of modem/voice signal data and provides the interface and control logic needed to transfer data between its serial I/O terminals and the PCI interface.

The ES2840, the high-voltage DAA device, handles the line-monitoring and filtering functions, while also protecting the signaling characteristics, performing all AC and DC functions, and interfacing with the line side of tip and ring operations.

The ES2839/2840 modem solution meets all requirements for Microsoft WHQL certification, as well as V.250, V.251, and V.253 commands

The ES2839 is available in a 100-pin low-profile quad flat pack (LQFP) package. The ES2840 is available in an industry-standard 20-pin super small outline pack (SSOP) package.