EL7586A

The EL7586 and EL7586A represent multiple output regulators for use in all large panel, TFT-LCD applications. Both feature a single boost converter with an integrated 2A FET, two positive LDOs for V_ONand V_LOGIC generation, and a single negative LDO for V_OFFgeneration. The boost converter can be programmed to operate in either P-mode or PI-mode for improved load regulation.

Both EL7586 and EL7586A also integrate fault protection for all four channels. Once a fault is detected, the device is latched off until the input supply or ENis cycled. EL7586 also features an integrated start-up sequence for _VBOOST/V_LOGIC,V_OFF, then V_ONor for V_LOGIC, V_OFF, V_BOOST, and V_ON. The latterrequires a single external transistor. The timing of the start-up sequence is set using an external capacitor.
EL7586A features an immediately-enabled _VLOGICoutput which is independent of EN input. The V_LOGICoutput will be switched off if a fault is detected and the power supply needs to be recycled to reset this condition.

Both the EL7586 and EL7586A are pin-compatible, come in the 20 Ld 4x4 QFN package, and are specified for operation over the -40°C to +85°C temperature range.