EL7182C

Features:

3V and 5V Input compatible
Clocking speeds up to 10 MHz
Reduced clock skew
20 ns Switching/delay time
2A Peak drive
Low quiescent current
 Wide operating voltageÐ 4.5V±16V


Application

CCD Drivers requiring highcontrast imaging
Differential line drivers
Push-pull circuits


Specifications

Supply (Va to Gnd)                                                            16.5V
Input Pins                                            -0.3V to a0.3V above Va
Combined Peak Output Current                                            4A
Storage Temperature Range                            -65 to a150
Ambient Operating Temperature                      -40 to a85O
perating Junction Temperature                                        125
Power Dissipation
SOIC                                                                            570 mW
PDIP                                                                          1050 mW

Important Note:
All parameters having Min/Max specifications are guaranteed. The Test Level column indicates the specific device testing actually performed during production and Quality inspection. Elantec performs most electrical tests using modern high-speed automatic test equipment, specifically the LTX77 Series system. Unless otherwise noted, all tests are pulsed tests, therefore TJ=TC=TA.

Test Level      Test Procedure
I                     100% production tested and QA sample tested per QA test plan QCX0002.
II                    100% production tested at T_A e 25§C and QA sample tested at T_A e 25 ,
                       TMAX and TMIN per QA test plan QCX0002.
III                   QA sample tested per QA test plan QCX0002.
IV                    Parameter is guaranteed (but not tested) by Design and Characterization Data.
V                     Parameter is typical value at T_A e 25 for information purposes only.



Description

The EL7182C is extremely well suited for driving CCD's, especially where high contrast imaging is desirable. The 16V supply rating is attractive for higher voltage CCD applications, as in color fax machines. The input is TTL and 3V compatible. The low quiescent current requirement is advantageous in portable/ battery powered systems. The EL7182 is available in 8-pin P-DIP and 8-lead SO packages.