EL7155C

Features:

• Clocking Speeds up to 40MHz
• 15ns tr/tf at 2000pF C_LOAD
• 0.5ns Rise and Fall Times Mismatch
• 0.5ns T_ON-T_OFF Prop Delay Mismatch
• 3.5pF Typical Input Capacitance
• 3.5A Peak Drive
• Low on Resistance of 3.5Ω
• High Capacitive Drive Capability
• Operates from 4.5V up to 18V



Application

• ATE/Burn-in Testers
• Level Shifting
• IGBT Drivers
• CCD Drivers


Pinout




Specifications

Supply Voltage (VS+ to VL)                                         +18V
Input Voltage                                       VL -0.3V, VL+ +0.3V
Continuous Output Current                                      200mA
Storage Temperature Range                    -65°C to +150°C
Ambient operating Temperature                -40°C to +85°C
Operating Junction Temperature                              125°C
Power Dissipation                                             see curves
Maximum ESD                                                              2kV


Description

   The EL7155C high-performance pin driver with tri-state is suited to many ATE and level-shifting applications. The 3.5A peak drive capability makes this part an excellent choice when driving high capacitance loads.

   Output pins OUTH and OUTL are connected to input pins VH and VL respectively, depending on the status of the IN pin. One of the output pins is always in tri-state, except when the OE pin is active low, in which case both outputs are in tri-state mode. The isolation of the output FETs EL7155C from the power supplies enables VH and VL to be set independently, enabling level-shifting to be implemented.

   This EL7155C pin driver has improved performance over existing pin drivers. It is specifically designed to operate at voltages down to 0V across the switch elements while maintaining good speed and on-resistance characteristics.

   Available in the 8-Pin SOIC and 8-Pin PDIP packages, the EL7155C is specified for operation over the -40°C to +85°C temperature range.