EL6205

Features:

• Low power dissipation
• Reduced parts count from the conventional solution
• User-selectable frequency from 60MHz to 600MHz controlled with a single resistor
• User-selectable amplitude from 15mA_PK-PK to 100mA_PK-PK controlled by 0.3mA to 2mA input current
• Auto turn-off threshold
• Soft edges for reduced EMI
• Small 6-pin SOT-23 package



Application

• DVD players
• DVD-ROM drives
• Combo drives
• MO drives
• General purpose laser noise reduction
• Local oscillator capability


Pinout




Specifications

V_DD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .             -0.5V to +6.0V
I_OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .             -0.5V to +6.0V
R_FREQ, IN . . . . . . . . . . . . . . . . . . . . . . . . . . . .             -0.5V to +6.0V
Operating Ambient Temperature . . . . . . . . . . . . . . .  . 0°C to +70°C
Maximum Die Operating Temperature . . . . . . . . . . . .  . . . . . +150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . -65°C to +150°C
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA_PK-PK
Power Dissipation (max) . . . . . . . . . . . . . . . . . . . . . . . . See Curves


Description

   The EL6205 consists of a variable amplitude, push only, oscillator that also supplies the laser DC current. It is designed to easily interface to existing ROM controllers,
reducing parts count, and power dissipation.

   The reduction of parts count and the small package allows the oscillator EL6205 to be placed closer to the laser, thus reducing EMI. Also, the turn-on and turn-off edges are slew rate limited to reduce higher harmonics.

   The total current drawn from the power supply can be less than the laser threshold current due to the unique push-only modulation method. The average current EL6205 is less than the peak oscillator current, and can be less than half of the oscillator current. The power control current supplied from the main board is reduced to less than 2mA.

   One external resistor sets the oscillator frequency. A current applied to the IIN terminal determines the amplitude of the oscillator and laser DC current. If the oscillator amplitude is set very low, the output and oscillator are disabled. The part is available in the space-saving 6-pin SOT-23 package. It is specified for operation from 0°C to +70°C.