Features: * Low power dissipation* Reduced parts count from the conventional solution* User-selectable frequency from 60MHz to 600MHz controlled with a single resistor * User-selectable amplitude from 15mAPK-PK to 100mAPK-PK controlled by 0.3mA to 2mA input current* Auto turn-off threshold* Soft e...
EL6202: Features: * Low power dissipation* Reduced parts count from the conventional solution* User-selectable frequency from 60MHz to 600MHz controlled with a single resistor * User-selectable amplitude fr...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Voltages Applied to:
VDD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . . -0.5V to +6.0V
IOUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . . . -0.5V to +6.0V
RFREQ , IIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . -0.5V to +6.0V
Operating Ambient Temperature . . . . . . . . . . . . . . 0°C to +70°C
Maximum Die Operating Temperature. . . . . . . . . . . . . . . .+150°C
Storage Temperature Range . . . . . . . . . . . . . . .-65°C to +150°C
Output Current. . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . 100mAPK-PK
Power Dissipation (max) . . . . . . . . . . . . . . . . . . . . . . . See Curves
The EL6202 consists of a variable amplitude, push only, oscillator that also supplies the laser DC current. It is designed to easily interface to existing ROM controllers, reducing parts count, and power dissipation.
The reduction of parts EL6202 count and the small package allows the oscillator to be placed closer to the laser, thus reducing EMI. Also, the turn-on and turn-off edges are slew rate limited to reduce higher harmonics.
The EL6202 total current drawn from the power supply can be less than the laser threshold current due to the unique push-only modulation method. The average current is less than the peak oscillator current, and can be less than half of the oscillator current. The power control current supplied from the main board is reduced to less than 2mA.
One external resistor sets the oscillator frequency. A current applied to the IIN terminal determines the amplitude of the oscillator and laser DC current. If the oscillator amplitude is set very low, the output and oscillator are disabled. The part is available in the space-saving SOT23-5 package. It is specified for operation from 0°C to +70°C.