Features: * 200MHz -3dB bandwidth, AV=2* 12ns settling to 0.05%* VS = ±5V @ 15mA* Low distortion: HD2, HD3 @ - 60dBc at 20MHz* Differential gain 0.02% at NTSC, PAL* Differential phase 0.01° at NTSC, PAL* Overload/short-circuit protected* ±1 to ±8 closed-loop gain range* Low cost* Direct replacemen...
EL400: Features: * 200MHz -3dB bandwidth, AV=2* 12ns settling to 0.05%* VS = ±5V @ 15mA* Low distortion: HD2, HD3 @ - 60dBc at 20MHz* Differential gain 0.02% at NTSC, PAL* Differential phase 0.01° at NTSC,...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The EL400 is a wide bandwidth, fast settling monolithic amplifier built using an advanced complementary bipolar process. This amplifier uses current-mode feedback to achieve more bandwidth at a given gain than conventional operational amplifiers. Designed for closed-loop gains of ±1 to ±8, the EL400 has a 200MHz -3dB bandwidth (AV = +2), and 12ns settling to 0.05% while consuming only 15mA of supply current.
The EL400 is an obvious high-performance solution for video distribution and line-driving applications. With low 15mA supply current, differential gain/phase of 0.02%/0.01°, and a minimum 50mA output drive, performance in these areas is assured.
The EL400's settling to 0.05% in 12ns, low distortion, and ability to drive capacitive loads make it an ideal flash A/D driver. The wide 200MHz bandwidth and extremely linear phase allow unmatched signal fidelity. D/A systems can also benefit from the EL400, especially if linearity and drive levels are important.