Features: • Stable at gain of 2 and 100MHz gain_bandwidth product (EL2211, EL2311, & EL2411)• Stable at gain of 1 and 50MHz gain_bandwidth product (EL2210, EL2310, & EL2410)• 130V/s slew rate• Drives 150 load to video levels• Inputs and outputs operate at negative sup...
EL2310: Features: • Stable at gain of 2 and 100MHz gain_bandwidth product (EL2211, EL2311, & EL2411)• Stable at gain of 1 and 50MHz gain_bandwidth product (EL2210, EL2310, & EL2410)• 130V/...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Total Voltage Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6V
Peak Output Current . . . . . . . . . . . . . . . . . . ... . 75mA (per amplifier)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . .. .... . . See Curves
Storage Temperature Range . . . . . . . . . . . . . . . . . -65°C to +150°C
Operating Temperature Range . . . . . . . . . . . . . . . . -40°C to +85°C
Die Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
This family of dual, triple, and quad operational amplifiers built using Elantec's Complementary Bipolar process offers unprecedented high frequency performance at a very low cost. They are suitable for any application such as consumer video, where traditional DC performance specifications are of secondary importance to the high frequency specifications. On ±5V supplies at a gain of +1 the EL2210, EL2310, and EL2410 will drive a 150 load to +2V, -1V with a bandwidth of 50MHz and a channel-to-channel isolation of 60dB or more. At a gain of +2, the EL2211, EL2311, and EL2411 will drive a 150 load to +2V, -1V with a bandwidth of 100MHz with the same channel-to-channel isolation. All four achieve 0.1dB bandwidth at 5MHz.
The power supply operating range is fixed at ±5V or +10/0V. In single supply operation the inputs and outputs will operate to ground. Each amplifier draws only 7mA of supply current.