EL2142

Supply Voltage (V_CCV_EE) . . . . . . . . . . . . . . . . . . . . . . . . .... . . 12.6V
Maximum Output Current. . . . . . . . . . . . . . . . . . . . . . . ... . .. . . ±60mA
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . .. . . . +150°C
Recommended Operating Temperature . . . . . . . . . . . -..40°C to 85°C
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

The EL2142 is a very high bandwidth amplifier designed to extract the difference signal from noisy environments, and is thus primarily targeted for applications such as receiving signals from twisted pair lines, or any application where common mode noise injection is likely to occur.

The EL2142 is stable for a gain of one, and requires two external resistors to set the voltage gain. The output common mode level is set by the reference pin (VREF), which has a -3dB bandwidth of over 100MHz. Generally, this pin is grounded, but it can be tied to any voltage reference.

The EL2142 output can deliver a minimum of ±50mA and is short circuit protected to withstand a temporary overload condition.