DW025

The DW025 has the following features including Small size: 71.1 mm x 61.0 mm x 12.7 mm(2.80 in. x 2.40 in. x 0.50 in.);Low output noise;Industry-standard pinout;Metal case with separate case ground pin;2:1 input voltage range;Remote on/off (positive logic);UL Recognized, CSAt Certified, and VDE Licensed;Within FCC and CISPR Class A Radiated Limits;CE mark meets 73/23/EEC and 93/68/EEC directives;Two tightly regulated outputs.

The DW025-Series Power Modules are a family of dc-do converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide two regulated outputs. These modules offer low noise levels with industry-standard pinouts in a small footprint. Each highly reliable and efficient unit features remote on/off and current limit.The DW025-Series Power Modules use advanced, surface-mount technology and deliver high-quality, compact, dc-do conversion at an economical price.Efficiency greater than 80%, a wide operating temperature range, and a metal case are additional features of these modules.They have UL, CSA, and VDE recognition and operate within FCC and CISPR ClassA limits for radiated emissions.The DW025AJ-M, BK-M, and CL-M Power Modules are available with common output ground pins(pinout A); the DW025AA-and CC-M Power Modules M, AB-M, AF-M. BB-M are available with separate output ground pins (pinout B).

Stresses in excess of the absolute maximum ratings of DW025 can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow, do fuse with a maximum rating of 5 A (see Safety Considerations section).Based on the information provided in this data sheet on inrush energy and maximum do input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer's data for further information.