Maximum Operating Frequency
:
Collector- Emitter Voltage VCEO Max
:
Continuous Collector Current
:
Power Dissipation
:
Transistor Polarity
: NPN
Maximum Operating Temperature
: + 150 C
Packaging
: Reel
Mounting Style
: SMD/SMT
Typical Input Resistor
: 10 KOhms
Peak DC Collector Current
: 100 mA
Configuration
: Single
Typical Resistor Ratio
: 2.13
Package / Case
: EM-3
DescriptionThe feature of DTC114WETL are as follows: (1)built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors; (2)the bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input, and parasitic effects are almost completely eliminated; (3)only the on / off conditions need to be set for operation, making device design easy; (4)higher mounting densities can be achieved.
The absolute maximum ratings of the DTC114WETL are: (1)supply voltage: 50V; (2)input voltage: -10 to +30V; (3)output current: 100mA; (4)power dissipation: 200* mW; (5)junction temperature: 150; (6)storage temperature: -55 to + 150.
The following is about the electrical characteristics of DTC114WETL: (1)input voltage: 0.8V max at VCC=5V, IO=100A and 3V at VO=0.3V, IO=2mA; (2)output voltage: 0.1V typical and 0.3V max at IO=10mA, II=0.5mA; (3)input current: 0.88mA at VI = 5V; (4)output current: 0.5A max at VCC=50V, VI=0V; (5)DC current gain: 24 min at IO=10mA, VO=5V; (6)input resistance: 7k min, 10k typical and 13k max; (7)resistance ratio: 0.37 min, 0.47 typical and 0.57 max; (8)transistion frequency: 250MHz at VCE=10V, IE= .5mA, f=100MHz.
Parameters: | Technical/Catalog Information | DTC114WETL |
| Vendor | Rohm Semiconductor |
| Category | Discrete Semiconductor Products |
| Transistor Type | NPN - Pre-Biased |
| Voltage - Collector Emitter Breakdown (Max) | 50V |
| Current - Collector (Ic) (Max) | 100mA |
| Power - Max | 150mW |
| Resistor - Base (R1) (Ohms) | 10K |
| Resistor - Emitter Base (R2) (Ohms) | 4.7K |
| Vce Saturation (Max) @ Ib, Ic | 300mV @ 500A, 10mA |
| Current - Collector Cutoff (Max) | - |
| DC Current Gain (hFE) (Min) @ Ic, Vce | 24 @ 10mA, 5V |
| Frequency - Transition | 250MHz |
| Mounting Type | Surface Mount |
| Package / Case | SC-75-3, SOT-416, EMT3 |
| Packaging | Tape & Reel (TR) |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | DTC114WETL
DTC114WETL
DTC114WETLTR ND
DTC114WETLTRND
DTC114WETLTR
|
DTC114WETL Data Sheet
