DS9098P

Features:

Compact receptacle for F5 iButton mounting
Fully backward-compatible to DS9098
Contacts are stainless steel with selective tinead plating for optimal solderability to
   printed circuit board
Retainer to iButton connection is stainless steel to stainless steel
Withstands up to 250°C for surface mounting
Double redundancy of contacts (2 plus 2)
Contact force exceeds 200 grams for reliable connection
Prevents reversed insertion
At insertion, the iButton is latched for retenion
The iButton pops up for removal when latchs released
Gentle deflection of latches allows removal of he iButton >25 insertion/withdrawal
   cycles with no performance degradation
Compatible with standard pick and place equipment
Cleaning fluids drain freely for quick clean up 


Description

The DS9098P iButton Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed circuit board. It consists of three metal pieces (two for GROUND, one for DATA) molded into a body of black, heat-stabilized, 30% glass fiber reinforced Nylon 46.

When inserting an iButton into the DS9098P, closely align axis of the iButton and the retainer. The retainer then latches the flange of the iButton. At removal, limit deflection of retainer latches to just free the iButton edge from retained state. Avoid applying excess force to latches.

The DS9098P is only available on tape & reel. The tape specifications match those of 68-lead PLCC devices except for the deeper pockets and tape-feed sprockets on either side of the 44 mm tape. Alignment pedestals keep the part oriented on tape with the latches adjacent to the sprockets.