DS2119M

Series: -
Operating Temperature: 0°C ~ 70°C
Mounting Type: Surface Mount
Packaging: Tube
Number of Terminations: 9
Package / Case: 28-TSSOP (0.173", 4.40mm Width)
Supplier Device Package: 28-TSSOP
Type: SCSI, LVD, SE
Manufacturer: Maxim Integrated Products
Voltage - Supply: 4 V ~ 5.5 V


Features:

Fully compliant with SCSI SPI-2, SPI-3,  SPI-4, Ultra160, and Ultra320
Provides multimode low-voltage differential/single-ended (LVD/SE) termination for nine signal-line pairs
Auto-selection of LVD or SE termination
5% tolerance on SE and LVD termination resistance
Low power-down capacitance of 3pF
Onboard thermal-shutdown circuitry
SCSI-bus hot-plug compatible
Fully supports actively negated SE SCSI signals


Pinout




Description

The DS2119M Ultra3 LVD/SE SCSI Terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line.

For the LVD termination, the DS2119M integrates two current sources with nine precision resistor strings. For the SE termination, one regulator and nine precision 110Ω resistors are used. Three DS2119M terminators are needed for a wide SCSI bus.