DescriptionThe DS1816R-10+ is one member of the DS1816 series.The DS1816 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces...
DS1816R-10+: DescriptionThe DS1816R-10+ is one member of the DS1816 series.The DS1816 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). Whe...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SpecificationsTotal Max Power: 2,000 W Total Max Current: 164.2 A Input Voltage: 90 V to 264...
The DS1816R-10+ is one member of the DS1816 series.The DS1816 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition,the reset signal is kept in the active state for approximately 150ms to allow the power supply and processor to stabilize.
Features of the DS1816R-10+ are:(1)automatically restarts a microprocessor after power failure; (2)maintains reset for 150ms after VCC returns to an in-tolerance condition;(3)reduces need for discrete components;(4)precision temperature-compensated voltage reference and voltage sensor;(5)accurate 5%, 10% or 20% power monitoring ;(6)20% tolerance for use with 3V systems;(7)low-cost TO-92 or space saving SOT-23 packages available;(8)efficient open-drain output with internal 5k pull-up resistor;(9)operating temperature -40 to +85.The DS1816 provides the function of detecting out-of-tolerance power supply conditions and warning a processor-based system of impending power failure. When VCC is detected as out-of-tolerance, the RST signal is asserted.
The absolute maximum ratings of the DS1816R-10+ can be summarized as:(1)voltage on VCC pin relative to ground:-0.5V to +7.0V;(2)voltage on RST relative to ground:-0.5V to VCC + 0.5V;(3)operating temperature:-40 to +85;(4)storage temperature range:55 to +125;(5)soldering temperature:260 for 10 seconds.This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.On power-up, RST is kept active for approximately 150ms after the power supply has reached the selected tolerance. This allows the power supply and microprocessor to stabilize before RST is released.
At present there is not too much information about this model.If you are willing to find more about DS1816R-10+, please pay attention to our web! We will promptly update the relevant information.