DS1202S

• Real time clock counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap year compensation valid up to 2100
• 24 x 8 RAM for scratchpad data storage
• Serial I/O for minimum pin count
• 2.05.5 volt full operation
• Uses less than 300 nA at 2 volts
• Singlebyte or multiplebyte (burst mode) data transfer for read or write of clock or RAM data
• 8pin DIP or optional 16pin SOIC for surface mount
• Simple 3wire interface
• TTLcompatible (V_CC = 5V)
• Optional industrial temperature range 40°C to +85°C (IND)

The DS1202 Serial Timekeeping Chip DS1202S contains a real time clock/calendar and 24 bytes of static RAM. DS1202S communicateswith a microprocessor via a simple serial interface.The real time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.The end of the month date is automatically adjusted for months with less than 31 days, including corrections for leap year. The clock operates in either the 24hour or 12hour format with an AM/PM indicator. Interfacing theDS1202 with a microprocessor is simplified by using synchronous serial communication. Only three wires are required to communicate with the clock/RAM: (1)RST (Reset), (2) I/O (Data line), and (3) SCLK (Serial clock). Data can be transferred to and from the clock/RAM one byte at a time or in a burst of up to 24 bytes.The DS1202 is designed to operate on very low power and retain data and clock information on less than 1 microwatt.