DS1075Z

The DS1075Z is designed as is a fixed frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range 29.2kHz to 100 MHz through the use of an onchip factory-programmable prescaler and divider.

DS1075Z has seven features. (1)Dual fixed frequency outputs (30kHz to 100MHz). (2)No external components. (3)0.5% initial tolerance. (4)1% variation over temperature and voltage. (5)Single 5V supply. (6)Power-down mode. (7)Synchronous output gating. Those are all the main features.

Some absolute maximum ratings of the DS1075Z have been concluded as follow. (1)Its voltage on any pin relative to ground would be from -1.0V to +7.0V. (2)Its operating temperature range would be from 0°C to 70°C. (3)Its storage temperature range would be from -55°C to +125°C. (4)Its soldering temperature would be 260°C for 10 seconds. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some DC electrical characteristcs of the DS1075Z are concluded as follow. (1)Its supply voltage would be min 4.75V and typ 5V and max 5.25V. (2)Its high level output voltage would be min 2.4V. (3)Its low level output voltage would be max 0.4V. (4)Its high-level input voltage would be min 2V. (5)Its low level input voltage would be max 0.8V. (6)Its high level input current would be max 1uA at Vih=2.4V and would be max 25uA at Vih=5.25V. (7)Its low level input current would be min -1uA. (8)Its active supply current would be max 50mA. (9)Its standby current would be typ 0.8uA.

And some AC electrical characteristics of the DS1075Z are concluded as follow. (1)Its output frequency tolerance would be min -0.5% and typ 0 and max 5%. (2)ts combined frequency variation would be min -1% and max 1%. (3)Its long term stability would be min -0.5% and max +0.5%. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!