Interface Type
:
Antenna Connector Type
:
Maximum Operating Temperature
: + 85 C
Product
: Transceiver Modules
Frequency Band
: 433.92 MHz
Operating Supply Voltage
: 3 V
Supply Current Transmitting
: 12 mA
Dimensions
: 0.8 in x 0.7 in
Output Power
: 1.2 mW
Supply Current Receiving
: 4.5 mA
Features: · Designed for Short-Range Wireless Data Communications
· Supports 2.4-19.2 kbps Encoded Data Transmissions
· 3 V, Low Current Operation plus Sleep Mode
· Ready to Use OEM ModulePinout
Specifications
Rating |
Valuec |
Units |
Power Supply and All Input/Output Pins |
-0.3 to 4.0 |
V |
Non-Operating Case Temperature |
-50 to +100 |
|
Soldering Temperature (10 seconds) |
230 |
|
Characteristic Symbol Minimum Typical Maximum Units Operating Frequency fO 433.72 434.12 MHz Modulation Type OOK Data Rate 2.4 kbps Receiver Performance (OOK @ 2.4 kbps) Input Current 3 Vdc Supply IR 4.5 mA Input Signal for 10-4 BER 25 C -100 dBm Rejection 30 MHz RREJ 55 dB Transmitter Performance (OOK @ 2.4 kbps) Peak Input Current 3 Vdc Supply ITP 12 mA Peak Output Power PO 1.2 mW Turn On/Turn Off Time tON/tOFF 12/6 us Sleep to Receive Switch Time (100 ms sleep -85 dBm signal) tSR 200 us Sleep Mode Current IS 0.75 uA Transmit to Receive Switch Time (100 ms transmit -85 dBm signal) tTOR 200 us Receive to Transmit Switch Time tRTO 12 us Power Supply Voltage Range VCC 2.7 3.5 Vdc Operating Ambient Temperature TA -40 +85 C
DescriptionThe DR3100 transceiver module is ideal for short-range wireless data applications where robust operation, small size and low power consumption are required. The DR3100 utilizes RFM's TR3000 amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. The receiver section of the TR3000 is sensitive and stable. A wide dynamic range log detector provides robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering provide excellent receiver out-of-band rejection. The transmitter includes provisions for both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to suppress output harmonics, facilitating compliance with ETSI I-ETS 300 220 and similar regulations. The DR3100 includes the TR3000 plus all configuration components in a ready-to-use PCB assembly, excellent for prototyping and intermediate volume production runs.