DM74LS193

Features:

Fully independent clear input
Synchronous operation
Cascading circuitry provided internally
Individual preset each flip-flop


Specifications

Operating Free Air Temperature Range                     -0°C to +70°C
Supply Voltage                                                                             7V
Input Voltage                                                                               7V
Storage Temperature Range                                 -65°C to +125°C


Description

   The DM74LS193 circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by hav-ing all flip-flops clocked simultaneously, so that the outputs change together when so instructed by the steering logic.This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters.

   The outputs of the DM74LS193 four master-slave flip-flops are triggered by a LOW-to-HIGH level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is held HIGH.

    The DM74LS193 counter is fully programmable; that is, each output may be preset to either level by entering the desired data at the inputs while the load input is LOW. The output will change independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modi-fying the count length with the preset inputs.

   A clear input of DM74LS193 has been provided which, when taken to aof the count and load inputs. The clear, count, and load inputs are buffered to lower the drive requirements of clock drivers, etc., required for long words.

   These DM74LS193 counters were designed to be cascaded without the need for external circuitry. Both borrow and carry outputs are available to cascade both the up and down counting functions. The borrow output produces a pulse equal in width to the count down input when the counter underflows.

   Similarly, the carry output produces a pulse equal in width to the count down input when an overflow condition exists. The DM74LS193 counters can then be easily cascaded by feeding the borrow and carry outputs to the count down and count up inputs respectively of the succeeding counter. high level, forces all outputs to the low level; independent