DM74AS874WM

Mounting Style : SMD/SMT
Supply Voltage - Max : 5.5 V
Number of Circuits : 2
Polarity : Non-Inverting
Input Type : Single-Ended
Output Type : Single-Ended
Packaging : Tube
Maximum Operating Temperature : + 70 C
Propagation Delay Time : 10.5 ns
High Level Output Current : - 15 mA
Logic Type : D-Type Edge Triggered Flip-Flop
Package / Case : SOIC-24
Logic Family : 74AS
Low Level Output Current : 48 mA


Features:

·  Switching specifications at 50 pF
·  Switching specifications guaranteed over full temperature
   and VCC range
·  Advanced oxide-isolated, ion-implanted Schottky TTL process
·  3-STATE buffer-type outputs drive bus lines directly
·  Space saving 300 mil wide package
·  Bus structured pino


Pinout




Specifications

Supply Voltage ..........................................................7V
Input Voltage............................................................ 7V
Voltage Applied to Disabled Output .......................5.5V
Operating Free Air Temperature Range... 0°C to +70°C
Storage Temperature Range ..............-65°C to +150°C
Typical qJA
N Package .....................................................47.0°C/W
Note 1: The "Absolute Maximum Ratings" are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table will define the conditions
for actual device operation 


Description

These dual 4-bit registers of DM74AS874WM feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight latches of the DM74AS873 are transparent Dtype latches meaning that while the enable (G) is HIGH the Q outputs will follow the data (D) inputs. When the enable is taken LOW the output will be latched at the level of the data that was set up.

A buffered output control input of DM74AS874WM can be used to place the eight outputs in either a normal logic state (HIGH or LOW logic levels) or a high-impedance state. In the high-impedance state the outputs neither load nor drive the bus lines significantly.

The output control does not affect the internal operation of the latches. That is, the old data can be retained or new data can be entered even while the outputs are OFF.

The pinout is arranged to ease printed circuit board layout. All data inputs are on one side of the package while all outputs are on the other side.