DM74AS648

This DM74AS648 incorporates an octal bus transceiver and an octal D-type register configured to enable multiplexed transmission of data from bus to bus or internal register to bus.

This bus transceiver features totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or rela-tively low-impedance loads. The high-impedance third state and increased high-logic-level drive provide this DM74AS648 device with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. It is particularly attractive for implementing buffer registers, I/O ports, bidi-rectional bus drivers, and working registers.

The registers in the DM74AS646, DM74AS648 are edge-triggered D-type flip-flops. On the positive transition of the clock (CAB or CBA), the input bus data is stored.

The SAB and SBA control pins are provided to select whether real-time data or stored data is transferred. A LOW input level selects real-time data, and a HIGH level selects stored data. The select controls have a "make before break" configuration to eliminate a glitch which would nor-mally occur in a typical multiplexer during the transition between stored and real-time data.

The enable G and direction control pins provide four modes of operation; real-time data transfer from bus A to B, real-time data transfer from bus B to A, real-time bus A and/or B data transfer to internal storage, or internal store data transfer to bus A or B.

When the enable G pin is LOW, the direction pin selects which bus receives data. When the enable G pin is HIGH,both buses become disabled yet their input function is still enabled.

If you want to know more information about DM74AS648, please contact Seekic.