DLG3416

Common Pin :
Operating Voltage :
Operating Current :
Packaging :
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Illumination Color : Green
Wavelength : 565 nm
Display Type : 5 x 7 Dot Matrix
Number of Digits : 4
Character Size : 0.27 in


Features:

Dot Matrix Replacement for DL3416
0.270" 5x7 Dot Matrix Characters
128 Special ASCII Characters for English, German, Italian, Swedish, Danish, and Norwe-gian Languages
Wide Viewing Angle:  X Axis 50  Maximum,  Y Axis 75  Maximum
Close Vertical Row Spacing, 0.800" Centers
Fast Access Time, 110 ns at 25 C
Full Size Display for Stationary Equipment
Built-in Memory
Built-in Character Generator
Built-in Multiplex and LED Drive Circuitry
Each Character Independently Accessed
TTL Compatible, 5 Volt Power, V_IH=2.0 V, V_IL =0.8 V
Independent Cursor Function
Memory Clear Function
Display Blank Function for Blinking and Dim-ming
End-Stackable, 4-character Package
Intensity Coded for Display Uniformity
Extended Operating Temperature Range: 40 C to +85 C
Wave Solderable 


Specifications

DC Supply Voltage....................0.5 V to +7.0 Vdc
Input Voltage, Respect to GND
  (all inputs).......................0.5 V to V_CC +0.5 Vdc
Operating Temperature.................. -40 C to +85 C
Storage Temperature-....................40 C to +100 C
Relative Humidity at 85 C
(non-condensing).............................................85%
Maximum Solder Temperature,
0.063" (1.59 mm) below
Seating Plane, t<5 sec .................................260  C


Description

The DLR/DLO/DLG3416 is a four character 5x7 dot matrix display module with a built-in CMOS integrated circuit. This display is a "drop-in" replace-ment for the DL3416.

The integrated circuit of  DLR/DLO/DLG3416 contains memory, ASCII ROM decoder, multiplexing circuitry and drivers. Data entry is asynchronous and can be random. A dis-play system can be built using any number of DLX3416s since each charac-ter can be addressed independently and will continue to display the character last stored until replaced by another.

System interconnection of  DLR/DLO/DLG3416 is very straightforward. The least significant two address bits (A0, A1) are normally connected to the like-named inputs of all displays in the system. With four chip enables, four displays (16 characters) can easily be interconnected without a decoder.

Data lines of  DLR/DLO/DLG3416 are connected to all DLX3416s directly and in parallel, as is the write line (WR). The display will then behave as a write-only memory.

The cursor function of  DLR/DLO/DLG3416 causes all dots of a character position to illuminate at half brightness. The cursor is not a character, and when removed the previ-ously displayed character will reappear.

The DLX3416 has several features superior to competitive devices. True "blanking" allows the designer to dim the display for more flexibility of dis-play presentation. Finally the CLR clear function will clear the cursor RAM and the ASCII character RAM simultaneously.

The character set consists of 128 special ASCII characters for English, Ger-man, Italian, Swedish, Danish, and Norwegian.

All products are subjected to out-going AQL's of 0.25% for brightness match-ing, visual alignment and dimensions, 0.065% for electrical and functional.

Parameters:

Technical/Catalog Information	DLG3416
Vendor	OSRAM Opto Semiconductors Inc
Category	Optoelectronics
Color	Green
Size / Dimension	1.30" L x 0.79" W x 0.34" H (33.02mm x 20.07mm x 8.64mm)
Millicandela Rating	-
Configuration	-
Voltage - Forward (Vf) Typ	-
Internal Connection	-
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	DLG3416 DLG3416 475 1353 ND 4751353ND 475-1353