Features: Plug-In Upgrades for Industry-Standard DG417/DG418/DG419
Improved RDS(ON) Match Between Channels (3½ max, DG419 only)
Guaranteed RFLAT(ON) Over Signal Range (4½ max)
Improved Charge Injection (10pC max)
Improved Off-Leakage Current Over Temperature (<5nA at +85°C)
Withstand Electrostatic Discharge (2000V min) per Method 3015.7ApplicationSample-and-Hold Circuits Communications Systems
Test Equipment Battery-Operated Systems
Modems Fax Machines
Guidance and Control Systems PBX, PABX
Audio Signal RoutingMilitary RadiosPinout
SpecificationsVoltage Referenced to V-
V+.............................................................................................44V
GND..........................................................................................25V
VL.........................................................(GND - 0.3V) to (V+ + 0.3V)
Digital Inputs VS, VD (Note 1) .........(V- - 2V) to (V+ + 2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) (Note 1) .........................30mA
Peak Current, S or D (pulsed at 1ms, 10% duty cycle max)..100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) .................727mW
SO (derate 5.88mW/°C above +70°C)..............................471mW
CERDIP (derate 8.00mW/°C above +70°C).......................640mW
Operating Temperature Ranges
DG41_C_ ................................................................0°C to +70°C
DG41_D_ .............................................................-40°C to +85°C
DG41_AK.............................................................-55°C to +125°C
Storage Temperature Range ..............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .................................+300°C
DescriptionMaxim's redesigned DG417/DG418/DG419 precision, CMOS, monolithic analog switches now feature guaranteed on-resistance matching (3½ max) between switches and guaranteed on-resistance flatness over the signal range (4½ max). These switches conduct equally well in either direction and guarantee low charge injection, low power consumption, and an ESD tolerance of 2000V minimum per Method 3015.7. The new design offers low off-leakage current over temperature (less than 5nA at +85°C).
The DG417/DG418 are single-pole/single-throw (SPST) switches. The DG417 is normally closed, and the DG418 is normally open. The DG419 is singlepole/ double-throw (SPDT) with one normally closed switch and one normally open switch. Switching times are less than 175ns max for tON and less than 145ns max for tOFF. Operation is from a single +10V to +30V supply, or bipolar ±4.5V to ±20V supplies. The improved DG417/DG418/DG419 are fabricated with a 44V silicon-gate process.
DG418 Data Sheet
