Features: ±22-V Supply Voltage Rating
TTL and CMOS Compatible Logic
Low On-Resistance-rDS(on): 45
Low Leakage-ID(on): 20 pA
Single Supply Operation Possible
Extended Temperature Range
Fast Switching-tON: 85 nsApplicationIndustrial Instrumentation
Test Equipment
Communications Systems
Computer Peripherals
Portable Instruments
Sample-and-Hold CircuitsSpecificationsVoltages Referenced to V
V . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 44 V
GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V
Digital Inputsa VS, VD . . . . . . . . . . . . . . . . . . (V-)2 V to (V+) +2 V
or 30 mA, whichever occurs first
Current, Any Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Peak Current, S or D
(Pulsed at 1 ms, 10% duty cycle max) . . . . . . .. . . . . . . . . . 100 mA
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 65 to 125
Power Dissipation (Package)b
16-Pin Plastic DIPc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 mW
16-Pin Narrow SOICd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 mW
16-Pin TSSOPd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mW
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 6.5 mW/ above 75
d. Derate 7.6 mW/above 75DescriptionQuad Complementary CMOS Analog Switch
The versatile DG213 analog switch has two NC and two NO switches. DG213 can be used in various configurations, including four single-pole single-throw (SPST), two single-pole double-throw (SPDT), one "T" switch, one DPDT, etc. DG213 is fabricated in a Siliconix' proprietary high-voltage silicon gate CMOS process, resulting in lower on-resistance,lower leakage, higher speed, and lower power consumption.
This analog switch was designed for a wide variety of general purpose applications in telecommunications,instrumentation, process control, computer peripherals, etc.An improved charge injection compensation design minimizes switching transients. These switches can handle up to ±22 V, and have an improved continuous current rating of 30 mA. An epitaxial layer prevents latchup.
DG213 Data Sheet
