Cat 7-R7

Features:






Specifications






Description

      This is the description about Cat 7-R7 of 5 tap leading edge control, standard delay modules.
      When Cat 7-R7 test conditions are @ 25, the following data is available. Pulse voltage is 3.2 Volts. Rise time is 3.0 ns (10%-90%). Pulse width is 1.2 x total delay. Pulse period is 4 x pulse width. Supply current is 35 mA typical. Supply voltage is 5.0 Volts.
      Here are the Cat 7-R7 tolerances. Input to taps + 2 ns or 5% , whichever is greater tap to tap + 2 ns or 7% , whichever is greater delays measured @ 1.5 v levels on leading edge only with no loads on taps rise and fall times measured from 0.75 v to 2.4 v levels.
      The Cat 7-R7 electrical characteristics are these. SCat 7-R7 upply voltage is from 4.75 to 5.25 V. Logic 1 input voltage is 2.0 V.  Logic 0 input voltage is 0.8 V. Logic 1 output current is -1 mA. Logic 0 output current is 20 mA. Logic 1 output voltage is 2.7 V. Logic 0 output voltage is 0.5 V. Input clamp voltage is -1.2 V. Logic input current is 20 uA. Logic 0 input current is -0.6 mA. Short circuit output current is from -60 to -150 mA. Logic 1 supply current is 25 mA. Logic 0 supply current is 40 mA. Operating free air temperature is from 0 to 70. Min. input pulse width of total delay is 40%. Maximum duty cycle is 50 %. Temp. coeff. of total delay (TD ) is 100 + (25000/TD) PPM/.
      These are the Cat 7-R7 notes: transfer molded for better reliability; compatible with ttl & dtl circuits; terminals: electro-tin plate phosphor bronze; performance warranty is limited to specified parameters listed; SMD - tape & reel available: 24mm wide x 12mm pitch, 750 pieces per 13" reel.
      At present there is not too much information about Cat 7-R7. If you are willing to find more about the Cat 7-R7, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.