CYV15G0201DXB

Features:

• Dual channel transceiver for 195 to 1500 MBaud serial signaling rate
-Aggregate throughput of 12 GBits/second
• Second-generation HOTLink® technology
• Compliant to multiple standards
-ESCON, DVB-ASI, Fibre Channel and Gigabit Ethernet (IEEE802.3z)
-CYV15G0201DXB also compliant to SMPTE 259M and SMPTE 292M
-8B/10B encoded or 10-bit unencoded data
• Selectable parity check/generate
• Selectable dual-channel bonding option
-One 16-bit channels
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
-Bit and Byte alignment
-Comma or full K28.5 detect
-Single- or multi-byte framer for byte alignment
-Low-latency option
• Synchronous LVTTL parallel interface
• Internal phase-locked loops (PLLs) with no external PLL components
• Optional Phase-Align Buffer in transmit path
• Optional Elasticity Buffer in receive path
• Dual differential PECL-compatible serial inputs per channel
-Internal DC-restoration
• Dual differential PECL-compatible serial outputs per channel
-Source matched for 50Ω transmission lines
-No external bias resistors required
-Signaling-rate controlled edge-rates
• Compatible with
-fiber-optic modules
-copper cables
-circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
-Analog signal detect
-Digital signal detect
• Low power 1.8W @ 3.3V typical
• Single 3.3V supply
• 196-ball BGA
• 0.25µ BiCMOS technology


Specifications

Storage Temperature ..............................................................65°C to +150°C
Ambient Temperature with Power Applied................................55°C to +125°C
Supply Voltage to Ground Potential .............................................. 0.5V to +3.8V
DC Voltage Applied to LVTTL Outputs in High-Z State ............0.5V to V_CC + 0.5V
Output Current into LVTTL Outputs (LOW)....................................................60 mA
DC Input Voltage....................................................................0.5V to V_CC + 0.5V
Static Discharge Voltage.......................................................................... > 2000 V
(per MIL-STD-883, Method 3015) Latch-up Current................................ > 200 mA


Description

The CYP(V)15G0201DXB^[1] Dual-channel HOTLink II™ Transceiver is a point-to-point or point-to-multipoint communications building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and unbalanced copper transmission lines) at signaling speeds ranging from 195- to 1500-MBaud per serial link.

The CYV15G0201DXB satisfies the SMPTE 259M and SMPTE 292M compliance as per the EG34-1999 Pathological Test Requirements.