Features: • Zero propagation delay• 2 switches connect inputs to outputs• Direct bus connection when switches are ON• High (>500 Meg ) resistance when switch is OFF• Performs bidirectional translator function between 3.3V and 5.0V power supplies• CMOS for low...
CYBUS3384: Features: • Zero propagation delay• 2 switches connect inputs to outputs• Direct bus connection when switches are ON• High (>500 Meg ) resistance when switch is OFF•...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The CYBUS3384 is a ten-bit, two-port bidirectional bus switch and the CYBUS3384 allows one bus to be connected directly to, or isolated from, another without introducing additional propagation delay or ground noise. The input and output voltage levels of the CYBUS3384 allow direct interface with TTL and CMOS devices. Two bus enable signals, BE1 and BE2, turn on the upper and lower five bits, respectively.
Designed with a low resistance of 2W, the CYBUS3384 is ideal for use in VME or other high DC drive applications.
The power-off disable feature of the CYBUS3384 enables modules and cards to be either inserted or withdrawn from operating equipment without shutting down power. Additionally, the CYBUS3384 facilitates bidirectional interfacing between 3.3V and 5V systems by placing a single diode in series with the 5V VCC line and a resistor from pin 24 to ground.
The CYBUS3384 is also suitable for small signal analog applications where crosstalk and off isolation performance of 66 dB at 50 MHz are required.