CXP82616

Features:

• Instruction set which supports a wide array of data types
- 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and boolean bit operations.
• Minimum instruction cycle 400ns for 10MHz, 122µs/for 32kHz operation
• On-chip ROM 12K bytes (CXP82612) 16K bytes (CXP82616)
• On-chip RAM 448 bytes (Including fluorescent display data area)
• Peripheral functions
- A/D converter 8-bit, 8-channel, successive approximation system (conversion rate 32µs/10MHz)
- Serial interface On-chip 8-bit, 8-stage FIFO (1 to 8 bytes auto transfer),1 circuit 2-channel
- Timers 8-bit timer 8-bit timer/counter 19-bit time base timer 32kHz timer/counter
- Fluorescent display controller/driver Maximum of 336 segments display available 1 to 16 digits dynamic display Dimmer function High voltage tolerance output (40V) On-chip pull-down resistor (Mask option) Hardware key scan function (Maximum of 8 ´ 16 key matrix available)
- Remote control receiver circuit On-chip 6 stage FIFO 8-bit pulse measurement counter
• Interrupts 13 factors, 13 vectors multi-interruption possible
• Standby mode Sleep/stop
• Package 80-pin plastic QFP
• Piggyback/evaluator CXP82600 80-pin ceramic QFP


Pinout

Specifications

Item	Symbol	Rating	Unit	Remarks
Supply voltage	VDD	0.3 to +7.0	V
Input voltage	VIN	0.3 to +7.0*1	V
Output voltage	VOUT	0.3 to +7.0*1	V
Display output voltage	VOD	VDD 40 to VDD + 0.3	V	As P channel transistor is open drain, VDD voltage is determined as reference.
High level output current	IOH	5	mA	Other than display putput pins*2: per pin
	IODH1	15	mA	Display output S0 to S20: per pin
	IODH2	35	mA	Display output T0 to T7 T8/S28 to T15/S21: per pin
High level total output current	IOH	40	mA	Total of other than display output pins
	IODH	100	mA	Total of all output pins
Low level output current	IOL	15	mA	Port 1 pin
	IOLC	20	mA	Large current port*3
Low level total output current	IOL	100	mA	Entire pin total
Operating temperature	Topr	20 to +75	°C
Storage temperature	Tstg	55 to +150	°C
Allowable power dissipation	PD	600	mW

Description

The CXP82616 microcomputer is composed of a CPU, ROM, RAM, and I/O ports. These chips feature many other high-performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time-base timer, fluorescent display controller/driver, remote control receiver and 32kHz timer/counter.

This CXP82616 also includes a power-on reset function and sleep/stop functions which can be used to achieve low power consumption.