CS5526

·Delta-Sigma A/D Converter
   - Linearity Error: 0.0015%FS
   - Noise Free Resolution: 18-bits
·Bipolar/Unipolar Input Ranges
   - 25 mV, 55 mV, 100 mV, 1 V, 2.5 V and 5 V
·Chopper Stabilized Instrumentation Amplifier
·On-Chip Charge Pump Drive Circuitry
·4-Bit Output Latch
·Simple three-wire serial interface
   - SPI™ and Microwire™ Compatible
   - Schmitt Trigger on Serial Clock (SCLK)
·Programmable Output Word Rates
   - 3.76 Hz to 202Hz (XIN = 32.768 kHz)
   - 11.47 Hz to 616 Hz (XIN = 100 kHz)
·Output Settles in One Conversion Cycle
·Simultaneous 50/60 Hz Noise Rejection
·System and Self-Calibration with Read/Write Registers
·Single +5 V Analog Supply
   +3.0 V or +5 V Digital Supply
·Low Power Mode Consumption: 4.9 mW
  - 1.8 mW in 1 V, 2.5 V, and 5 V Input Ranges

The 16-bit CS5525 and the 20-bit CS5526 are highly integrated A/D converters which include an instrumentation amplifier, a PGA (programmable gain amplifier), eight digital filters, and self and system calibration circuitry.

The converters CS5526 are designed to provide their own negative supply which enables their on-chip instrumentation amplifiers to measure bipolar ground-referenced signals ±100 mV. By directly supplying NBV with -2.5 V and with VA+ at 5 V, ±2.5 V signals (with respect to ground) can be measured.

The digital filters  CS5526 provide programmable output update rates between 3.76 Hz to 202 Hz (XIN = 32.768 kHz). Output word rates can be increased by approximately 3X by using XIN = 100 kHz. Each filter is designed to settle to full accuracy for its output update rate in one conversion cycle. The filters with word rates of 15 Hz or less (XIN = 32.768 kHz) reject both 50 and 60 Hz (±3 Hz) line interference simultaneously.

Low power, single conversion settling time, programmable output rates, and the ability to handle negative input signals make these single supply products ideal solutions for isolated and non-isolated applications.